Miteqi Vacuum Cleaner Fault Analysis
Release time:2023-04-07
1. Fault phenomenon: The motor does not rotate.
Possible causes:
1. The power plug is not properly inserted;
2. The power outlet has no power;
3. The vacuum cleaner’s power is not turned on;
4. The motor is burned out.
Handling method:
1. Recheck and ensure the plug is properly inserted;
2. Make sure the power outlet has power;
3. Turn on the switch;
4. Replace the motor.
II. Fault Phenomenon:
The motor burned out.
Possible causes: 1. The current exceeds the rated load, causing blockage and prolonged formation of vacuum negative pressure.
Lotus;
2. Dust has entered the motor;
3. Sewage foam and the like enter the motor.
Solution: 1. Check the power supply and voltage;
2. Motor repair.
3. Fault phenomenon: Reduced suction power
Possible causes: 1. Dust cover, filter, nozzle, vacuum hose, vacuum cleaner steel
Pipe blockage;
2. The nozzle, vacuum hose, and vacuum steel pipe are damaged.
Handling method: 1. Empty the dustbin;
2. Remove any blockages from the vacuum cleaner and the vacuum hose.
3. Clean or replace the filter bags.
4. Fault phenomenon: Dust spills out during vacuuming.
Possible cause: The dust filter is improperly installed or damaged.
Solution: 1. Check whether the filter bag is installed in the correct position.
2. Check whether the filter bags are damaged;
3. Inspect the seals.
The previous one
The next one
The previous one
The next one
More blogs
Room 1010, South Tower, Xinda City Plaza, No. 27, Second Horizontal Road, Shuiyin Road, Yuexiu District, Guangzhou, China