You should have your vacuum cleaner serviced and inspected before the new year.

Release time:2021-01-18

Maintenance steps for Metengqi industrial vacuum cleaners. Any workplace that uses industrial vacuum cleaners is typically an adverse environment. Since these vacuum cleaners operate for long periods, the lifespan of an industrial vacuum cleaner depends, in part, on product quality as well as proper maintenance. By consistently following the steps outlined below, you can not only enhance the dust removal performance of your industrial vacuum cleaner but also extend its service life.

1. Regularly check whether the machine’s power plug and power cord are damaged. After use, neatly coil up the power cord and place it on top of the device.

2. After completing the vacuuming operation, be sure to check the filter for any foreign objects or blockages, and clean it if necessary.

3. During use, the vacuum cleaner should be handled with care and not subjected to random impacts or collisions.

4. When storing the vacuum cleaner, it should be placed in a dry and well-ventilated area.

5. When cleaning the vacuum cleaner, use a damp cloth with water or a neutral detergent. Please do not use any cleaning agents containing corrosive substances, as they may cause cracks in the device’s外壳.

6. When using an industrial vacuum cleaner continuously, the suction power may decrease due to clogging of the filter screen. You should promptly clean both the dust bag and the filter screen, and the suction power will be restored.

7. The vacuum hose should not be repeatedly bent or flexed, nor subjected to excessive stretching or twisting.

8. The power supply voltage at the usage location must be consistent with the rated voltage of the industrial vacuum cleaner. If an extension cord is used, a power cord that meets the required specifications should be purchased.

9. During use, if you notice any foreign objects blocking the suction tube or filter, immediately turn off the power, remove the foreign objects, and then resume operation. This is to prevent damage to the vacuum motor.