News Center
Blog
Why is it necessary to clean the grinding disc after curing and repairing with a grinder?
Release time:2020-03-07
During floor grinding operations, after each grinding pass, the worn-down grinding discs must be thoroughly cleaned. Otherwise, next time you start working, sand particles trapped inside the discs could cause irreparable scratches on the floor—especially during the curing process. After repairing the floor, be sure to clean the grinding discs promptly. As a dust-free construction technique specifically designed for curing floor applications, if you’re using the “grinding method” to repair the floor by applying patching agents and repair mortars, the grinding discs will inevitably pick up traces of these patching materials. These residues need to be removed immediately; otherwise, once they’ve dried completely, they’ll become much harder to clean.
When using a grinder during floor construction, after completing each grinding pass, the worn-out grinding discs must be thoroughly cleaned to prevent...
During the next construction, the grinding disc contained grit, resulting in irreparable floor scratches—especially at the cured areas.
When performing maintenance, remember to clean the grinding pads after the ground has been repaired.
As a dust-free construction process specifically designed for the curing of floor surfaces, when repairing the ground, if it’s a scattered repair...
The patching compound and repair mortar are applied using the “grinding method.” After grinding, the grinding disc is coated with the patching agent and repair mortar, or...
The repair material needs to be cleaned up promptly; otherwise, once it’s completely dry, it’ll become much harder to remove. And if you’re not careful,
Using these grinding discs to grind the floor with a floor grinder can damage the floor, potentially beyond repair.
It may take a significant amount of time to repair, adding trouble to the floor construction.
Therefore, after using a floor grinder for curing and repair—especially when performing grinding repairs—remember to check and clean the metal grinding discs.
The Metengqi MG30 medium-sized grinder avoids direct hard contact between the grinding disc and the floor, completely eliminating issues such as uneven wear of the grinding disc and "disc sucking."
The small and uneven ground contact area extends the service life of the grinding disc and increases the grinding area.
The previous one
The previous one
More blogs
Room 1010, South Tower, Xinda City Plaza, No. 27, Second Horizontal Road, Shuiyin Road, Yuexiu District, Guangzhou, China