Troubleshooting for a vacuum cleaner malfunction

Release time:2020-03-03

When the vacuum cleaner has no suction: 1. Check whether the material inlet of the vacuum cleaner is blocked; 2. Check whether the main filter is clogged—if so, clean or replace it promptly; 3. Check whether the liquid tank is full—if the float ball is blocking the suction port, empty the liquid immediately; 4. Verify that the air supply meets the required operating conditions; 5. Check whether the silencer and filter are clogged—if they are, replace them promptly. If the machine is damaged, please have it repaired by the manufacturer or a qualified professional designated by the manufacturer. In the event of a malfunction, immediately disconnect the air supply connector and never leave a defective product in operation. Guests, when using the machine in daily life,

When the vacuum cleaner has no suction:

1. Check whether the dust collector’s material inlet is blocked.

2. Check whether the main filter is clogged; if so, clean or replace it promptly.

3. Check whether the liquid has been fully drawn in. If the float ball is blocking the suction port, promptly empty the liquid.

4. Check whether the air source meets the operating conditions;

5. Check whether the muffler and filter are clogged; if so, they should be replaced.

If the machine is damaged,

Please have the repair carried out by the manufacturer or a qualified professional designated by them.

If the machine malfunctions, immediately disconnect the air supply connector.

Do not put defective products into operation.

Guests, when using this equipment in your daily routine, be sure to follow proper operating procedures and prioritize safe production!

The previous one