How to use a floor scrubber properly?
Release time:2023-03-24
For Floor scrubber In general, daily maintenance is extremely important—it not only affects the floor scrubber’s cleaning performance but also impacts its service life. So, how should we use a floor scrubber properly?
Step 1: Check the battery status to confirm that the battery is fully charged and that the battery connector has been reinserted into the internal port on the device.
Step 2: Pour clean water into the clean water tank and add an appropriate amount of professional floor cleaner according to the specified ratio. Then, pour about 30 milliliters of defoaming agent into the wastewater tank to reduce foam formation and prevent it from affecting the floor-cleaning performance.
Step 3: Install the squeegee and check whether the rubber strip of the squeegee is worn. If the rubber strip is worn, it must be replaced promptly. First, lower the brush plate, then lower the squeegee.
Step 4: Press the main brush activation switch on the control panel, then press the water suction fan switch to activate the water-suction function. Adjust the cleaning water outlet valve to the appropriate position according to the condition of the floor.
Step 5: Gently push the neck rod forward, following the cleaning path.
Finally, after cleaning is complete, press the water-absorbing fan button, lift the water-absorbing rake brush disc, and place it in a dry, well-ventilated area once cleaning is finished.
The previous one
The next one
The previous one
The next one
More blogs
Room 1010, South Tower, Xinda City Plaza, No. 27, Second Horizontal Road, Shuiyin Road, Yuexiu District, Guangzhou, China