News Center
Blog
What are the maintenance methods for industrial vacuum cleaners?
Release time:2022-09-15
I. First, let’s introduce the preparatory steps before using a wet-and-dry industrial vacuum cleaner:
1. Check whether the power cord, plug, switch, and other components of the wet-and-dry vacuum cleaner are damaged. If so, they must be repaired or replaced.
2. Ensure that the interior of the wet-and-dry vacuum cleaner’s dustbin is thoroughly cleaned and that all accessories (such as suction tubes, brushes, dust bags, etc.) are free from blockages.
3. Test the overall suction power of the wet-and-dry vacuum cleaner to confirm that it’s functioning properly. If not, check the connections between various components and ensure that the sealing ring at the base of the nozzle is in good condition.
4. Confirm the cleaning task for the working environment. If you’re vacuuming dry debris, make sure to install the dust bag; if you’re vacuuming liquids, you don’t need a dust bag. However, do not use the wet-and-dry vacuum cleaner in areas with excessive debris or sludge.
II. Precautions during operation of the wet-and-dry industrial vacuum cleaner:
1. Check that the motor plug of the wet-and-dry vacuum cleaner is securely and firmly inserted. Otherwise, when powered on, the motor may run unevenly, resulting in insufficient suction power and reducing the motor’s lifespan.
2. When using the wet-and-dry vacuum cleaner for vacuuming or liquid extraction, control the motor flexibly. For example, if a three-motor unit can achieve the desired result with just one or two motors, there’s no need to activate the third motor. However, for large-area cleaning tasks, try to use all three motors in rotation.
3. If the wet-and-dry vacuum cleaner is operating in an environment where foam is present or likely to form, be sure to add an anti-foaming agent into the dustbin to eliminate the foam. Do not allow the foam to enter the motor along with the strong airflow.
4. During operation of the wet-and-dry vacuum cleaner, the power cable should not be excessively long, and you must not extend it yourself. The cable’s diameter must meet the machine’s requirements. Also, avoid coiling the power cable tightly, as this can create a magnetic field and lead to insufficient voltage supply.
5. Pay attention to any changes in the noise level of the wet-and-dry vacuum cleaner’s motor. If the motor noise suddenly becomes deeper or louder, check the connecting pipes or verify that the dustbin is full. In such cases, clean the pipes or remove objects from the dustbin. Another possible cause is extremely loud noise—this usually indicates a problem with the vacuum cleaner’s motor, which requires timely repair.
6. When the wet-and-dry vacuum cleaner is used to extract liquid substances, remove the nozzle assembly first. Do not invert the machine, ensuring that no liquid enters the motor. Also, make sure that no corrosive materials enter the motor, as this could cause damage.
I. First, let’s introduce the preparatory steps for using a wet-and-dry industrial vacuum cleaner:
1. Check whether the power cord, plug, switch, and other components of the wet-and-dry vacuum cleaner are damaged. If so, they need to be repaired or replaced.
2. Check whether the body of the wet-and-dry vacuum cleaner is thoroughly cleaned and whether any of its accessories (such as the suction hose, brush nozzle, dust bag, etc.) are blocked.
3. Check the suction performance of the wet-and-dry vacuum cleaner as a whole to confirm that it is functioning properly. If not, inspect the connection points of each component and ensure that the sealing ring at the base of the nozzle is in good condition.
4. Check and confirm that the cleaning task for the work environment has been completed. If vacuuming, make sure to install the dust bin and dust bag. If suction is for water, there’s no need to use a dust bag; however, do not use a wet-and-dry vacuum cleaner in areas with excessive debris or sludge.
II. Precautions for Operation of Wet-and-Dry Industrial Vacuum Cleaners:
1. Check whether the motor plug of the wet-and-dry vacuum cleaner is properly and securely inserted. Otherwise, after power-on, the motor may run unevenly, resulting in insufficient suction power and shortening the motor’s service life.
2. The wet-and-dry vacuum cleaner features flexible motor control when vacuuming or mopping—such as with a three-motor system. If only one or two motors are sufficient to achieve the desired result, there’s no need to activate the additional motor. However, for large-area cleaning, it’s best to maximize the use of all three motors in a cyclical operation.
3. When using a wet-and-dry vacuum cleaner in environments where foam is present or where significant foam is generated, it is essential to add an antifoaming agent to the tank to eliminate the foam and prevent it from being carried into the motor by the strong airflow.
4. During the use of a wet-and-dry vacuum cleaner, the power cord should not be excessively long, and you must not extend it yourself. The wire gauge must meet or exceed the specifications required by the machine. Additionally, the power cord must not be coiled tightly into loops, as this could generate a magnetic field and result in insufficient operating voltage for the appliance.
5. Pay attention to any changes in the noise level of the wet-and-dry vacuum cleaner’s motor. If the motor noise suddenly becomes deeper and louder, you should check all connecting hoses or verify whether the dust container is full. In this case, clean the hoses or remove the contents from the container. Another possible cause of extremely loud noise is a problem with the vacuum cleaner’s motor itself, which requires timely repair.
6. When cleaning up liquid substances sucked up by a wet-and-dry vacuum cleaner, you must remove the nozzle head. Do not tilt the machine upside down to prevent liquids from entering the motor. Also, ensure that no corrosive substances get into the motor, as this could cause damage.
The previous one
The previous one
More blogs
Room 1010, South Tower, Xinda City Plaza, No. 27, Second Horizontal Road, Shuiyin Road, Yuexiu District, Guangzhou, China