Operating Procedure for Driving a Floor Scrubber
Release time:2021-02-02
Once the preparatory work for driving the floor-scrubbing guitar is complete, be sure to pay close attention to the operating procedure. Next, we’ll introduce you to the driving process. Floor scrubber Some operational steps and precautions.
1. First, lower the scrubbing machine’s brush disc or needle holder, and be sure to ensure that the corresponding cleaning pad is attached to either the brush disc or the needle holder.
2. Next, lower the suction scraper.
3. If it’s a fully automatic washing machine—say, one equipped with an automatically driven motor—then you’ll need to adjust the speed of the drive motor to an appropriate setting.
4. Next, turn on the machine’s power switch.
5. Press the switches for the solenoid valve, the brush motor, and the water suction motor, respectively.
6. Then gently push the machine forward, and it will begin its cleaning operation normally. If it’s a fully automatic machine, you’ll need to press the forward switch for the machine to start working.
Before officially ending the work, you must push the machine away from the main passageway, turn off the solenoid valve and the motor switch for the brush disc, lift the brush disc, and ensure that all wastewater in this area has been completely sucked into the wastewater tank, leaving no wastewater remaining on the floor.
More blogs
Room 1010, South Tower, Xinda City Plaza, No. 27, Second Horizontal Road, Shuiyin Road, Yuexiu District, Guangzhou, China