News Center
Blog
Company News
Industry News
Product Q&A

Application Center

08

2022-12

What area size is suitable for using a small ride-on floor scrubber?

Many customers often find it unclear to distinguish between the use of ride-on floor scrubbers and manual push floor scrubbers. Ride-on sweepers are much easier to operate—offering not only greater comfort but also significantly boosting work efficiency. So, what’s the ideal area size for using a small ride-on floor scrubber? Let’s take a brief look at the suitable areas for ride-on floor scrubbers. Generally, manual push equipment is easy to identify: for areas ranging from approximately 1,000 to 5,000 square meters, manual push equipment can handle the job just fine. A single manual push unit can cover around 3,000 square meters per hour and can operate continuously for about 2 hours. Therefore, for areas larger than 6,000 square meters, it’s worth considering a small ride-on sweeper. A small ride-on floor scrubber can achieve an hourly working efficiency of up to 4,500 square meters. Since the operator sits on it while driving, its continuous operation time is longer as well—typically, after a full charge, it can run for 3 to 4 hours. Thus, areas ranging from roughly 6,000 to 20,000 square meters are perfectly suited for this type of equipment.

2022-12-08

12

2022-12

What should I do if the high-pressure washer’s hose is clogged?

When using cleaning equipment, to achieve even more thorough cleaning results while reducing water consumption and enhancing cleaning efficiency, it’s essential to ensure operational stability and meet stringent standards for an environmentally friendly cleaning process. This can be accomplished by adjusting the impact pressure and water flow rate appropriately to maintain a balanced cleaning performance. Regarding the degree of reaction between the equipment and the pipelines, using a high-pressure washer can significantly improve cleaning effectiveness. In particular, this approach enhances the system’s responsiveness to potential malfunctions. But what if the pipeline becomes clogged—how should we address that issue? 1. Replace the pipeline with a larger-capacity one Pipeline blockages can result from various factors. When the pipeline’s internal volume is relatively small, this can severely affect the fluid flow and its overall performance. Therefore, replacing the existing pipeline with a new one that has a larger capacity is often the best solution. In designing the new pipeline, it’s crucial to select a configuration that accommodates a greater water flow capacity. 2. Use cleaning agents to resolve blockages During the operation of high-pressure washers, nozzle clogging can occur due to accumulated debris or other obstructions. Depending on the severity of the blockage, applying a suitable cleaning agent can effectively dissolve the buildup and restore smooth water flow through the pipeline.

2022-12-12

12

2022-12

Reasons for Noise in Industrial Vacuum Cleaners

When using industrial vacuum cleaners, you’re bound to encounter some rather unusual noises. So how can you identify the causes of these noises? 1. If your industrial vacuum cleaner’s dustbin or filter emits a “tap-tap” sound—indicating hard objects colliding—this suggests that the machine has sucked in metal particles, metal fragments, or other relatively hard, bulky objects. This could potentially damage the filter element. In such cases, simply stop the machine, remove the foreign objects from inside, and prevent further damage by avoiding contact between hard objects and the filter material. 2. If the motor area produces abnormal sounds like “tap-tap” or “click-click,” the source of the noise in your industrial vacuum cleaner could be due to the impeller being deformed and rubbing against the housing, or possibly because the rotor is touching the stator. Another possible cause is damage to the motor bearings. If these issues aren’t addressed promptly, they could lead to motor failure, and even overheating and ignition due to friction. As soon as you notice such noises, immediately stop the machine, disassemble the motor or impeller cover, and inspect which parts are experiencing abnormal friction or collisions. Then, adjust or repair the affected components accordingly. 3. Industrial vacuum cleaners typically have very strong suction power. If you use a vacuum nozzle or brush that’s too small or inappropriate for the job, not only will this affect the cleaning performance, but it can also cause the equipment to emit sharp or unusual noises.

2022-12-12

Let me introduce you to the Karcher BR55 floor scrubber.

12

2022-12

Let me introduce you to the Karcher BR55 floor scrubber.

Karcher BR55/4c Floor Scrubber The BR55 is a rotary-brush floor scrubber. With higher efficiency, lower energy consumption, and an eco-friendly design, it’s truly perfect. This equipment has a wide range of applications and is ideal for cleaning large-scale venues. It can be used in: factories, supermarket stores, large shopping centers, hospitals, health centers, stadiums and arenas, airports, train stations, and more. Its quiet 63-decibel design further provides users with a tranquil and comfortable environment. 1. The front wheels made of polyester material perform exceptionally well on both dry and wet surfaces, as well as on slopes. 2. A brand-new rubber material concept delivers the best drying efficiency, achieving outstanding results even on tiled floors. 3. The quiet design ensures that the operating noise level is only 63 dB(A), completely avoiding any disturbance to the normal working environment. 4. Equipped with a large-capacity battery and featuring low power consumption, it can operate continuously for up to 4.5 hours in normal mode. 5. The EDS-ECO system automatically adjusts the water and detergent ratios. The “Evergreen” function automatically provides the optimal combination of water volume, detergent ratio, and roller brush pressure for even better cleaning performance.

2022-12-12

Fun Facts About Vacuum Cleaners [Watch] [Watch]

12

2022-12

Fun Facts About Vacuum Cleaners [Watch] [Watch]

I. First, let’s introduce the preparatory steps before using a wet-and-dry industrial vacuum cleaner: 1. Check whether the power cord, plug, switch, and other components of the wet-and-dry vacuum cleaner are damaged. If so, they need to be repaired or replaced. 2. Ensure that the interior of the wet-and-dry vacuum cleaner’s dustbin is thoroughly cleaned and that all accessories (such as suction tubes, brushes, dust bags, etc.) are free from blockages. 3. Check the overall suction power of the wet-and-dry vacuum cleaner to confirm that it’s functioning properly. If not, inspect the connections between various components and ensure that the sealing ring at the base of the nozzle is in good condition. 4. Confirm the cleaning task for the working environment. If you’re vacuuming dry materials, make sure to install the dust bag; if you’re vacuuming liquids, you don’t need a dust bag. However, do not use the wet-and-dry vacuum cleaner in areas with excessive debris or sludge. II. Precautions during operation of the wet-and-dry industrial vacuum cleaner: 1. Check whether the motor plug of the wet-and-dry vacuum cleaner is securely and firmly inserted. Otherwise, when powered on, the motor may run unevenly, resulting in insufficient suction power and reducing the motor’s lifespan. 2. When using the wet-and-dry vacuum cleaner for vacuuming or water extraction, control the motor flexibly. For example, if a three-motor unit can achieve the desired result with just one or two motors, there’s no need to activate the third motor. However, for large-area cleaning tasks, try to use all three motors in rotation. 3. If the wet-and-dry vacuum cleaner is operating in an environment where foam is present or likely to form, be sure to add an anti-foaming agent into the dustbin to eliminate the foam. Do not allow the foam to enter the motor along with the strong airflow. 4. During the use of the wet-and-dry vacuum cleaner, the power cable should not be excessively long, and you must not extend it yourself. The cable diameter must meet the specifications required by the machine. Also, avoid coiling the power cable tightly, as this can create a magnetic field and lead to insufficient voltage supply. 5. Pay attention to any changes in the noise level of the wet-and-dry vacuum cleaner’s motor. If the motor noise suddenly becomes deeper or more pronounced, check the connecting pipes or verify that the dustbin is full. In such cases, clean the pipes or remove objects from the dustbin. Another possible cause of loud noise is a problem with the vacuum cleaner’s motor itself, which requires timely repair. 6. When the wet-and-dry vacuum cleaner is used to collect liquid substances, remove the nozzle assembly first. Do not invert the machine, ensuring that no liquid enters the motor. Also, make sure that no corrosive substances get into the motor, as this could cause damage.

2022-12-12

13

2022-12

The difference between floor scrubbers and manual floor cleaning.

1. Ride-on floor scrubbers can clean and dry between 3,000 and 5,000 square meters per hour, effectively replacing manual mopping. Hand-push battery-powered floor scrubbers can clean and dry up to 2,000 square meters per hour, also serving as a substitute for manual cleaning. 2. These machines have low operating costs—typically only a few yuan in electricity per day—and their wear-and-tear parts are inexpensive, requiring replacement only 2-3 times per year. 3. Mechanized operations deliver excellent results, high efficiency, fast speeds, and easy management. They represent an inevitable trend in the development of the cleaning industry. 4. Generally, these machines are more than 10 times as efficient as manual cleaning. The exact efficiency gain may vary depending on the specific model and the layout of the cleaning area. In short, floor scrubbers offer time savings, labor savings, cost savings, high efficiency, and superior cleanliness. Classification of Floor Scrubbers: By drive type, floor scrubbers can be categorized into: semi-automatic floor scrubbers, fully automatic floor scrubbers, and hand-push floor scrubbers. By power supply method, they can be divided into: corded floor scrubbers and battery-powered floor scrubbers. By operation mode, they include: hand-push floor scrubbers and ride-on floor scrubbers.

2022-12-13

13

2022-12

The primary uses of explosion-proof valves

Explosion-proof valves are primarily used in hydraulic systems of large-scale mechanical stages, lifting platforms, elevators, and vehicle inspection and repair frames—equipment that lacks mechanical locking systems. Their main function is to provide protection and prevent safety accidents. They constitute a type of locking mechanism within hydraulic systems. This requirement is mandatory for CE certification; thus, explosion-proof valves were first invented and manufactured in Europe. Later, they were introduced to China and have since gained widespread adoption. Explosion-proof valves feature a simple structure and a compact, space-saving design, making them easy to connect directly to the inlet of the actuator unit.

2022-12-13

< 1...515253...59 >

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home