News Center
Blog
Company News
Industry News
Product Q&A

News Center

29

2022-12

What basic precautions should be taken when using a floor scrubber?

As the application scope of floor scrubbers expands, basic operational precautions have become a common concern among users. So, what are the essential things to keep in mind during the daily use of a floor scrubber? Next, the editor from Metech will share with you some key points to note when using a floor scrubber: 1. Before cleaning, perform a preliminary cleanup of the area to be cleaned—removing small stones, large debris, and other objects. Failure to do so may interfere with the operation of the water suction blade and could also prevent the floor scrubber from functioning properly if it gets damaged. 2. Deep grooves on the floor can affect the floor scrubber’s water-suction efficiency. If the machine is not in use regularly, avoid randomly starting the brush motor when the brush disc is in the raised position; otherwise, the brush disc might get automatically disengaged. 3. If the floor scrubber is going to be idle for an extended period, thoroughly clean both the wastewater tank and the clean water tank, open their lids, and let them air-dry completely. (For battery-powered floor scrubbers, remove the batteries first.) Then, cover the floor scrubber with a dust-proof cloth and store it properly. 4. Avoid using the floor scrubber for excessively long periods at a time. If the machine becomes overheated after 3-4 hours of continuous use, allow it to cool down for a while before resuming operation. This helps prevent the motor from overheating and getting burned out.

2022-12-29

29

2022-12

What should I do if the high-pressure washer’s hose is clogged?

When using cleaning equipment, to achieve even more thorough cleaning results while reducing water consumption and enhancing cleaning efficiency, it’s essential to ensure operational stability and meet stringent standards for an environmentally friendly cleaning process. This can be accomplished by adjusting the impact pressure and water flow rate appropriately to maintain a balanced cleaning performance. Regarding the degree of reaction between the equipment and the pipelines, using a high-pressure washer can significantly improve cleaning effectiveness. In particular, this approach enhances the system’s responsiveness to potential malfunctions. But what if the pipeline becomes clogged—how should we address that issue? 1. Replace the pipeline with a larger-capacity one Pipeline blockages can result from various factors. When the pipeline’s internal volume is relatively small, this can severely affect the fluid flow and its overall performance. Therefore, replacing the existing pipeline with a new one that has a larger capacity is often the best solution. In designing the new pipeline, it’s crucial to select a configuration that accommodates a greater water flow capacity. 2. Use cleaning agents to resolve blockages During the operation of high-pressure washers, nozzle clogging can occur due to accumulated debris or other obstructions. Depending on the severity of the blockage, applying a suitable cleaning agent can effectively dissolve the buildup and restore smooth water flow through the pipeline.

2022-12-29

29

2022-12

Performance of accessories shared by explosion-proof vacuum cleaners

In dust-handling operations conducted under high-efficiency working conditions, the structural design and performance of explosion-proof vacuum cleaners are of paramount importance. In the food industry, where large amounts of dust are generated, blockages in pipelines can easily occur, preventing normal dust collection. Therefore, the component design of these devices incorporates specific installation and processing features that enhance their long-term operational advantages. First, regarding the explosion-proof vacuum cleaning performance, the equipment is equipped with a load-bearing processor that automatically shuts down when the dust accumulation reaches a certain threshold. Additionally, by taking into account the thickness of metal pipes and the size of the dust being collected, the device effectively increases its capacity to absorb large volumes of dust without risking rupture or explosion. Second, in terms of technical specifications, the equipment has been upgraded to optimize the density and thickness of the air being drawn in, addressing the issue of insufficient pressure within the chamber at temperatures as low as 80°C. The device employs a 1000-watt motor, significantly reducing noise levels during operation and enhancing both runtime and overall performance. As for explosion-proof vacuum cleaners used in dust-collection applications, their design incorporates advanced stamping technology and filtration systems that ensure airtight sealing, thereby preventing clogging and static electricity buildup—a common issue in various industrial sectors. Guangzhou Qingqinyu Environmental Protection Technology (Meitengqi brand) is a manufacturer specializing in the production of large-scale dust removal systems for factory workshops, mobile and stationary high-power industrial vacuum cleaners, industrial vacuum and water suction units, welding fume extractors, and central dust collection systems. We also produce mechanical and electronic equipment such as milling machines, vibratory rulers, cutting machines, plate compactors, and universal industrial cleaners. We welcome your inquiries! Visit our website at http://www.meitengqi.com/.

2022-12-29

03

2023-01

What should you pay attention to when using a robot vacuum?

Nowadays, many households use robotic vacuum cleaners, but they often don't pay much attention to their maintenance. As a result, these devices don't last very long and end up being quite wasteful. So, what precautions should we take when using them to ensure they have a longer lifespan? 1. Do not use the robotic vacuum cleaner in damp or wet environments, as moisture could cause the motor to short-circuit and even catch fire. If your robot is not designed for both dry and wet cleaning, absolutely do not let it suck up water. 2. Do not allow flammable items such as matches or cigarette butts to be sucked into the robotic vacuum cleaner. 3. Avoid using it for excessively long periods. If the body becomes overheated, stop using it for a while before resuming. This prevents the motor from overheating and burning out. 4. Never use the robotic vacuum cleaner in hazardous areas where flammable or explosive materials are present, to avoid the risk of fire or explosion. 5. After each cleaning session, the robotic vacuum cleaner will automatically return to its charging dock to recharge, ready to start its next scheduled cleaning cycle. If you plan not to use the robotic vacuum cleaner for an extended period, unplug the power cord from the socket, remove the battery from the robot, and store it properly in a dry place.

2023-01-03

03

2023-01

What should I do if the high-pressure washer’s hose is clogged?

When using cleaning equipment, to achieve even more thorough cleaning results while reducing water consumption and enhancing cleaning efficiency, it’s essential to ensure operational stability and meet stringent standards for an environmentally friendly cleaning process. This can be accomplished by adjusting the impact pressure and water flow rate appropriately to maintain a balanced cleaning performance. Regarding the degree of reaction between the equipment and the pipelines, using a high-pressure washer can significantly improve cleaning effectiveness. In particular, this approach enhances the system’s responsiveness to potential malfunctions. But what if the pipeline becomes clogged—how should we address that issue? 1. Replace the pipeline with a larger-capacity one Pipeline blockages can result from various factors. When the pipeline’s internal volume is relatively small, this can severely affect the fluid flow and its overall performance. Therefore, replacing the existing pipeline with a new one that has a larger capacity is often the best solution. In designing the new pipeline, it’s crucial to select a configuration that accommodates a greater water flow capacity. 2. Use cleaning agents to resolve blockages During the operation of high-pressure washers, nozzle clogging can occur due to accumulated debris or other obstructions. Depending on the severity of the blockage, applying a suitable cleaning agent can effectively dissolve the buildup and restore smooth water flow through the pipeline.

2023-01-03

03

2023-01

How industrial vacuum cleaners remove fine dust: a cleaning method.

2023-01-03

04

2023-01

Metengqi teaches you how to choose a suitable industrial vacuum cleaner.

Before purchasing an industrial vacuum cleaner, how do you choose the right one? Below, Metech has compiled several key considerations for you: First, consider the cleanliness requirements of your environment. For instance, you might wonder whether an industrial vacuum cleaner is truly necessary. In fact, industrial vacuum cleaners share some features with floor scrubbers and sweepers, which can sometimes confuse buyers. From our perspective, if you need to keep workshop floors clean over a large area, you might want to consider purchasing a push-type automatic floor scrubber. If the space is particularly open and spacious, a ride-on floor scrubber could be a better choice—both can efficiently maintain environmental hygiene. However, if your task involves dealing with dust from machinery and equipment that’s difficult to clean, then an industrial vacuum cleaner would be a good option. Just keep in mind that it won’t provide the same cleaning effect as a floor scrubber. Second, pay attention to the density and quantity of dust. Here, we’re focusing on environments with heavier dust accumulation and more challenging conditions—industrial vacuum cleaners, not commercial ones, are the ones we’re discussing. This factor is crucial for determining the power and capacity of the industrial vacuum cleaner. Also, consider whether the dust is dry, wet/dry dual-purpose, or oily. Nowadays, many working environments are even more demanding, so you may need to use an industrial oil-absorbing vacuum cleaner to handle such situations effectively. Third, think about how frequently and for how long you’ll be using the industrial vacuum cleaner. Decide whether you need an industrial vacuum cleaner that can operate continuously for 24 hours straight. Fourth, after determining your specific needs and configurations, you’ll also need to select an appropriate supplier or manufacturer—preferably one that specializes in cleaning equipment and industrial vacuum cleaners, or a first-tier distributor. Such suppliers not only offer competitive pricing but also ensure reliable availability of spare parts and excellent after-sales service.

2023-01-04

< 1...124125126...128 >

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home